A pressure washer extension wand may increase your work performance depending on the right type that goes well with your machine. An extension wand increases the Length of your spray gun by a large degree so that you can easily clean the higher parts of your house. Suppose you have a three-storied house, and its outing has become pretty dirty, and you want to clean it using your pressure washer. With the regular spray gun, the concentrated water might not reach after one or two stories.
Even if the water reaches, it loses the sufficient force that is required to clean the dirt. In this case, and extension wand will increase the Length, and your spray nozzle will be closer to the surface and create the maximum force to clean it properly. I hope this review will help you find the best pressure washer extension wand so that it becomes easier for you to buy one.
Table of Contents
- The 9 Best Pressure Washer Extension Wand
- American Hydro Clean PLQ25-33B-AHC Stainless Steel Quick Connect Lance, 33 “A wand that brings mobility in your work;
- B E Pressure 85.206.424L Telescoping Wand, 4-Stage, 24′ Length, 4000 psi, 200 Degree F, 8.0 GPM, Black/Yellow
- Briggs & Stratton 6206 Extension Wand for Pressure Washers, 9-Feet
- M MINGLE Pressure Washer Wand Extension, Replacement Lance, 7.5-Feet, 1/4 Inch Quick Connect, 4000 PSI
- Tool Daily Pressure Washer Extension Wand, 90 Inch Power Washer Lance, 1/4 Inch Quick Connect, M22, 4000 PSI
- Powerfit PF31011A Extension Wand for Pressure Washers, 36-Inch
- AR North America Telescoping Lance 6′ – 18′, Fiberglass
- Twinkle Star Pressure Washer Extension Wand Set, 7.5 ft Replacement Lance, 4000PSI
- SIMPSON Cleaning 31″ Wand Extension 4500 PSI
- How does a Telescopic Extension Wand for Pressure Washer Work?
- What is an Extension Wand for Pressure Washer?
- Everything You Need to Know about Pressure Washer Extension Wand before Buying
The 9 Best Pressure Washer Extension Wand
Review on some of the best extension wands are given below:
American Hydro Clean PLQ25-33B-AHC Stainless Steel Quick Connect Lance, 33 “A wand that brings mobility in your work;
Americal Hydro-Clean PLQ25-33B-AHC is a pretty strong extension wand. For its durability, you don’t have to worry since it is made of stainless steel.
The wand will give you a length of 33 inches, which should be enough to get the maximum speed. Up to 4500 PSI water force can be tolerated by this high-quality wand.
You can also use up to 230o F water, and its 1/4BSPP M22 connection will fit most of the spray guns. Look at its good and bad sides.
Don’t forget to check your nozzle and spray gun connection sizes so that you can match them with this wand. This product is quite a durable one for your pressure washer, and it will be a wise investment for you.
B E Pressure 85.206.424L Telescoping Wand, 4-Stage, 24′ Length, 4000 psi, 200 Degree F, 8.0 GPM, Black/Yellow
This extension hose can be stretched and made to the Length of small size pressure washer hose. Your work will be easier and comfortable with this telescopic wand. It is partly made of fiber and partly metal. It has 2/3 inches inlet and 1/2 inches outlet and quick-connect plug for a better connection. Around 4000 PSI tolerance level is the strength of this wand, and it can flow up to 8.0 GPM water. Its bras socket accepts the color-coded nozzles. You can use up to 180o F temperature water for better cleaning. You will get the following benefits.
To buy this extension wand, you must check the connections so that you don’t regret it later. Your investment will be safe as it is quite durable, and the company is ready to solve any of your problems related to the product.
Briggs & Stratton 6206 Extension Wand for Pressure Washers, 9-Feet
6206 extension wand is like a telescopic want where you will get three parts that can be attached to each other to make a long one. It can be 9 feet long which will allow you easy clean to your hard to reach areas. It can be connected to all the M22 fittings, which is the size of most of the machines and nozzles. This is exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. The good and bad sides are as follows.
If you are in need of an extension wand, you can easily rely on this one. It will provide you excellent service for a longer period of time. For any kind of questions, you can also talk to their experts at any time of the day.
M MINGLE Pressure Washer Wand Extension, Replacement Lance, 7.5-Feet, 1/4 Inch Quick Connect, 4000 PSI
Combining the 6 parts, 15 inches each, of this wand, can be the length of 90 inches, which is quite long. The parts are separate from each other, which can be connected using ¼ inches male connector and used. It has around 4000 PSI tolerance levels, and you can connect this to the pressure washer parts using ¼ inches female socket. Stainless steel is used to make this wand for better durability. Check its benefits and demerits.
Buying this will be a wise decision if you really need an extension wand. Your investment will be safe and secure with this product; it will serve you for a long period of time. If you happen to buy this product, don’t forget to give your feedback to us.
Tool Daily Pressure Washer Extension Wand, 90 Inch Power Washer Lance, 1/4 Inch Quick Connect, M22, 4000 PSI
This is another set of 6 parts, 15 inches each, which can be joined to one another and made a long wand. The total length of the joined parts is 90 inches, and it can tolerate 4000 PSI water pressure, which means you can use your residential machine with it. The wand connects to pressure washer gun by M22 male thread or 1/4″ quick connect plug. It can easily be connected to nozzles, foam cannon, water broom, undercarriage cleaner, surface cleaner, cleaning brushes, gutter cleaner attachment, etc. See its advantages and disadvantages.
You can buy this item if you need an extension wand. You will get any length up to 90 inches by joining its parts. It’s durable, comfortable, and it will give proper value to your investment.
Powerfit PF31011A Extension Wand for Pressure Washers, 36-Inch
This is a durable yet light-weight extension wand for making your cleaning easier. You will get around 12 inches to reach with this wand, and you will not have any problem handling it like a telescopic wand. Its water pressure tolerance level is 4500 PSI, which high for a residential pressure washer. Its click-connect coupler system makes it easier to connect with others and help you right when you need it. Before selecting, see its good and bad sides.
For your regular cleaning, this extension wand will be quite good. You don’t have to worry about connecting its different parts as it has only one whole part. Without any hesitation, you can invest in this product and get its service for a long time.
AR North America Telescoping Lance 6′ – 18′, Fiberglass
If you have an AR Blue Clean pressure washer, this extension wand is for you. It’s a telescopic wand that can be stretched up to 18 feet. It is made of fiberglass and can tolerate around 4000 PSI water pressure. Different connections can be made using its ¼ inches quick connect, allowing the hook up fast and easy. You will be able to use a maximum 300o F water temperature to make your cleaning perfect. Let’s see what benefits you will get out of it.
For investing in an extension wand, it might be ideal for you. For the people who are using AR Blue clean pressure washers, they don’t have to worry much about the connections. Your investment will be safe and secure.
Twinkle Star Pressure Washer Extension Wand Set, 7.5 ft Replacement Lance, 4000PSI
With proper grip and six parts, the extension wand is Twinkle Star Pressure Washer Extension Wand. 15 inches each part becomes 90 inches when joined to one another and provides you a good length for your cleaning. 1/4 inches quick connector is used for easy connecting, and it can tolerate around 4000 PSI water pressure. The company is providing a full refund if a customer has dissatisfaction using it. The benefits that you will get from this product are given below.
To clean your hard to reach areas, this extension wand will be quite perfect for you. It will last for a long period of time, and your investment will be secured with it.
SIMPSON Cleaning 31″ Wand Extension 4500 PSI
For your little distance covering areas, this extension wand will be a good product. It’s made of metal ensuring its durability; it can tolerate up to 4500 PSI water force. This is a cold water wand, and it’s recommended not to use any hot water. Its connectors are designed in such a way that they will fit most gas powered pressure washer parts. It has a length of 16 inches, which should be enough for cleaning your hard-to-reach areas. See its good and bad sides before selection.
Light and convenient is this extension wand, which will provide you a good cleaning experience. Your money will be well invested in this product. It’s quite strong and durable that you find in most of your products.
How does a Telescopic Extension Wand for Pressure Washer Work?
An extension wand is an extra wand to increase the Length of a spray gun, and a telescopic extension wand also works in the same way. This type of wand can be expanded or reduced like a telescope. Two or three aluminum or fiberglass wands will be put inside each other, and when you pull them, they will slide out one by one. You will get a better idea if you closely look at the functions of your umbrella that you use on a rainy or sunny day. At the joining parts, high tolerant rubber is used to prevent any kind of leakage.
Whenever you need a long wand, you just have to connect the telescopic extension wand to your spray gun and pull it. The wand will slide out one by one to fit your required Length. It might be a little difficult to control this type of wand when fully extended because of its Length. You might need to use a belt to handle it properly.
Advantages of Using Extension Wands with Pressure Washers
You will find multiple advantages when you start using an extension wand with your pressure washing machine. Most of the time, we are unable to clean the outer side of a two or three-storied building just because the water force of pressure washer reduces when it reaches there. To be exact, the following benefits we get from an extension wand.
- It gives access to clean the hard to reach or high areas without much effort.
- Your cleaning becomes perfect and makes the surface clean and shiny.
- You can easily wash the roof, siding, windows, and other surfaces of your second-story home.
- Standing on the ground, you can even clean the gutters of your house easily.
- You will not feel any trouble even if you have a short hose.
What is an Extension Wand for Pressure Washer?
An extension wand is nothing but a long metal hose that can be attached to the spray gun of your pressure washing machine. There are different types, and qualities extension wands are available in the market. Some wands are curved so that it can reach those areas where it’s difficult to reach with a straight gun.
Both sides of an extension wand contain quick connectors; one side is attached to the spray gun, and on the other side, you need to connect your spray nozzle. The telescopic wands provide even more Length as they can be expanded or shortened easily.
Types of Telescopic Wands
As stated before, a telescopic wand increases and decreases in Length like a telescope. Based on the quality and material, you will get two different types of telescopic wands in the market.
- Fiberglass Telescopic Wand: Most of the part of this type of wand is made of fiber, and it is light in weight. Because of its weight and low price, most of the people like it. This type of wands is not as strong as the aluminum-made ones. You might have to face difficulty if you extend it to its full length.
- Aluminum Telescopic Wand: The other type of telescopic wand is aluminum wands. They are made of aluminum and heavier than the fiberglass wands. You will have to count more money to buy them, but these are quite durable and strong. In your cleaning process, it will not create any problem, but you might have to use a belt to control it because of its heavyweight.
Everything You Need to Know about Pressure Washer Extension Wand before Buying
Buying requires knowledge, experience, and confidence, whether you buy a new car or an extension wand. There are certain facts and features that you must keep in mind when you go to buy a wand. Else, you might end up buying a product that you didn’t want, or you could have purchased a better wand with the money that you spent. Let’s see the required information that we should look at while making the purchase.
Measure Your Working Area: At first, you need to measure what type of work you need your extension wand for. This will help you decide the exact type of you wand for your cleaning.
- Know About its Types: You can choose a regular wand or a telescopic wand, which will give you a long coverage of your area. There are wands with curves of different angles, and the others are straight. Different wands have different connectors, and you need to match that goes with your machine.
- Do Some Research: If you are new to this field, you either need to read the expert reviews or talk to an expert before selecting one. This is an important step that will not only help you select an appropriate wand but also help you with how to use it in a better way. Because of that, you mustn’t ignore it.
- Budget and Selection: The better product needs more money, and this is the place you might need to think. You will be on the winning side if you can purchase a better product at a low price. Check the features and facilities of multiple extension wands before you make a decision.
- Make the Purchase: After considering all the things above, now is the time to buy your product. You can order online or go to a shop to buy. Don’t forget to check the product and listen to the seller if he has anything to say about using it.
Now you are the owner of an extension wand, and you can use it any time you want.
How to Assemble and Use Extension Wands with Pressure Washer
An extension wand’s work is to increase the Length of your spray gun and give you proper access to hard-to-reach areas for better cleaning. It’s quite easy to use these parts with your pressure washing machine.
The first work is to identify one end that should be attached to the spray gun. The user manual will help you in this case and show you how you should connect it. The latest connectors are easy and quick to connect, so you will not face any problem. In this way, you can use a general extension wand.
For a telescopic wand, you have to take some extra steps. First, connect it to your spray gun and then slide it out for greater Length and lock each part so that it doesn’t slide back in a while using. As stated earlier, it’s a little difficult to control a telescopic wand because of its increased Length. You can wear a belt that you can find in the same shop where you bought your wand from. Attach it to your spray gun and tie it to your waist for better control over the wand.
Note: If you Interested to know about The Easy Tips For Terrace Gardening for Gardening. Here Ox Review Describe all about 8 Easy Tips For Terrace Gardening.
Frequently Asked Questions
Q. How do I match my connectors with the extension wand?
A: You have to see the user manuals of both your machine parts and extension wand to match the connectors. You can also know it from the seller by telling your pressure washer model.
Q: Do I need a belt while using the extension wand?
A: The telescopic wands become heavy when fully expanded, and you might need a belt to handle it. For the small wands, you will not need it.
Q: How do I attach my belt to my spray gun?
A: First, attach one side of your belt to your spray gun, wrap it around your waist and then attach the other end.
Q: Where do I get a belt for my extension wand?
A: You can buy it from the same seller whom you purchased your extension wand from. You can also buy them from an e-commerce site.
Q: How can I find out if I need an extension wand?
A: Your working place or stuff will tell you about it. If you work in an area where your cleaning surface is far, and your regular spray gun can’t provide enough force, you might need an extension wand.
Q: What extension wand do I need to clean inside my tank or gutter?
A: A tank or gutter has different corners, and a straight gun might not reach every corner. You should choose a curved wand. Depending on the type of your tank, you have to decide the degree of your extension wand curve.